A:The following are the characteristics of the rubber water stop:
1.In the process of product installation, the interface is simple, safe and reliable.In the field using heat welding method or heat curing method and docking,to make sure that the water stop lap seam is quality, safe, reliable, and in order to make the waterproof quality of the construction joint/expansion joints be more perfect,more secure and reliable guarantee.
|
2.Rubber sealing strip can be carried out daily detect and repair. Through a preset grouting pipe to water leakage detection, If because of the waterstop quality or construction quality and other reasons, resulting in construction joint leakage, through the grouting pipe grouting repair is the most effective and rapid economic.And it can make the waterproof quality of the construction seam / deformation joints be more safe and reliable durable.
|
3.This product operation is simple, economical and practical. Water stop belt is provided with a mounting hole, easy to installation and accurate positioning.Grouting pipe can be reused, detection and repair has the advantages of simple operation, to avoid the traditional drilling and grouting repair, and it has good effect and low cost. Rubber water stop with is that we can use the rubber itself has a high elasticity and compression deformation characteristics, deformation is generated under various loads, so as to effectively fastening seal, to prevent the leakage of construction, water seepage and cushioning, thereby improving the construction / expansion joint water-proof safety coefficient. If there is a leak, by grouting, effective and rapid repair. Water quality is reliable and no recurrence.The comprehensive cost is the most economical and it completely solve the traditional water stop weakness.
|
\ n \ n P: ¿Cuál es el ancho y el grosor comúnmente utilizados para detener el agua de goma? A: ancho comúnmente utilizado (mm): 230,250,270,280,290,395,300,350,400 y así sucesivamente. Las especificaciones especiales se pueden personalizar. \ N \ n Espesor común (mm): 6,7,8,10 mm y así sucesivamente. \ N \ n \ n P: ¿Cuál es el método de aplicación del agua de goma parada? A: La parada de agua de goma necesaria adopta medidas fijas confiables, barra de refuerzo de acero y encofrado. Evite que la parada de agua de caucho tenga lugar durante el vertido del hormigón, para garantizar que el agua se detenga en el lugar correcto en el hormigón. Para fijar el tope de agua, solo en la parte de agua que permita el agujero perforado, no dañe eficazmente a prueba de agua partes del agua detenidas. \ n Método comúnmente fijado: utilice el refuerzo adicional fijado; Fijación especial fija; con el cable y la plantilla fijados. No importa el método fijo, Para el método fijo de la parada de agua debe de acuerdo con los requisitos de diseño de la especificación de la construcción y es necesario garantizar la ubicación exacta de parada de agua, No dañar las piezas impermeables de agua eficaz, conveniente para el vertido del hormigón. \ n \ n \ n \ n \ n \ n Información de contacto \ n Sales Manager: Miss. Joyce \ n Teléfono móvil: + 86-15233296877 \ n Tel: 86-318-5106277 \ n Fax: 86-0318-5106277 \ n Sitio web: www.prolianz.com \ n Compañía: Hengshui Jianfeng Engineering Rubber Co., LTD. Grupos de Producto : Serie de parada de agua > Parada de agua de goma
|