Descripción del producto Modelo N º: varios Morfología: Agua Emulsión Material: Polisulfuro Agente principal Composición: promotor de polisulfuro tixotrópico Composición: agente de curado Color: Sellador negro Color: según sus requisitos Vida útil: 12 Monthes Especificación: ISO9001 / TS16949 Código HS: 522338 Función de unión: Aplicación de adhesivo subacuático: construcción, vidrio aislante Clasificación: curado de habitaciones Característica: resistente al agua Composición: material orgánico Mercados de exportación: Servicio global de OEM y ODM: Sí Marca registrada: jianfeng Origen: Hebei, China Información de contacto \ nAdministrador de ventas: kent \ nTeléfono móvil: +86 -15233296877 \ nTel: 86-318-5106277 \ nFax: 86-0318-5106277 \ nSitio web: www.prolianz.com \ nEmpresa: Hengshui Jianfeng Engineering Rubber co., LTD.
orte

Product Use:  1: Glue-coating before glue coping withered material surface cleaning, clean before coating. Otherwise, it will affect the adhesive seal.  2: Takes out A and B two components according to 10: 1 proportion to carry on the mix agitation to be even, achieves the achromatism.  3: Manual or mechanical operation must arrange a direction coating and put some pressure, prevent the air wrapped into.  4: Construction of the ambient temperature maintained at above 5 ° C

Packaging into large, medium and small 1, large package: Group A[300KG] Group B [33.3KG] 2, medium package: Group A[30KG] Group B[3.35KG] 3, small package: Group A[4.5KG × 5 barrels of group B were] Group B[0.5KG × 5]

Product Characteristics Solvent free: Don't produce any volatile compound. Outstanding thixotropism, suitable for all-wave construction. Low tack: Construction craftwork is simple and improve efficiency, cost reduction. After solidification, it form elastomer, which has excellent cohesion to glass and aluminum alloy etc metal. Suitable for all kinds of climate: It could keep its characteristics from -50 ° Cto 100° C and could construct from -5° C to 45° C. It has compatibility with all kinds of hot melt butyl, suitable for the manufacture of double times sealing of insulating glass.

Storage Life Please keep in cool and dry place below 27° C to extend the validity of product, the validity period is 12 months. Mode of Transportation This product is nonflammable, nonexplosive, non-toxicity, it could transport by train, vehicle, ship, airplane etc. Serious Statement: This product cannot be used as structural cohesiveness of curtain wall, sunroof, sun room, frosted glass.

Under the conditions of the 23±2 °C and the R.H. 50±5%
Item		Component A			Component B
Viscosity(Pa's)		4000			800
Appearance		Fine, smooth and homogeneous			fine, smooth and grease-like
Color		White			Black
Density(g/em 3 )		1.75±0.1			1.52±0.1
Mixed Component A and Component B at 10:1 by weight, under the conditions of 23±2 °C and the R.H. of 50±5%
Item			Standard		Result	Test method
Resistance to flow, mm	Vertical		≤3		0.8	GB/T 1 13477
	Level		No distortion		No distortion
Application Time, 30min ,S			≤10		4.8
A:B=10:1, Under the conditions of the  23±2 °C and the R.H. of 50±5%, after 7days of curing:
Item				Standard	Result	Test method
Durometer hardness (Shore A)					45	GB/T 1 531
Tensile strength , MPa				MPa	0.8	GB/T 1 13477
Permeation rate of evaporation (g/m 2 .d)				≤15	8	GB/T 1 1037
GB/T 1 13477					25HM	JC/T 1 486

orte

Grupos de Producto : Sellador impermeable serie > Sellador de polusulfuro