Tipo de Pago: | L/C, T/T, Western Union, Paypal |
---|---|
Cantidad de pedido mínima: | 10 |
Plazo de entrega: | 1 días |
Modelo: Movement 53-330mm
Jianfeng bridge elastomeric expansion joints are structural components designed to provide smooth passage over the gap between adjacent sides of a deck joint, while also permitting relative translation and/or rotation of the two sides of a bridge deck (deck movement joint). A deck movement joint is generally defined as a structural discontinuity between two elements, at least one of which is a deck element, and is designed to allow relative translations and rotations due to: thermal expansion and contraction of the superstructure, concrete shrinkage or creep, elastic shortening due to pre-stressing, displacement of the structure under load, or any other action the desk is subjected to. |
Items | Rubber | |
Plate-type | Combined type | |
1. Max horizontal frictional resistance of expansion and compression(KN/m) | <18 | ≤8 |
2. Max vertical deviation or deformation of expansion and compression | -3-3 | -2-2 |
Model | Movement accommodation | Module Length | Module width | Stud depth | Stud diam | Module weight |
150 | 38mm | 1750mm | 240mm | 35mm | 12mm | 30kg |
200 | 50mm | 1830mm | 274mm | 40mm | 12mm | 48kg |
250 | 65mm | 1830mm | 356mm | 46mm | 16mm | 68kg |
300 | 76mm | 1830mm | 432mm | 52mm | 20mm | 88kg |
400 | 102mm | 1830mm | 590mm | 54mm | 20mm | 150kg |
650 | 165mm | 1830mm | 724mm | 75mm | 24mm | 272kg |
900 | 230mm | 1830mm | 890mm | 93mm | 24mm | 375kg |
1300 | 330mm | 1220mm | 1204mm | 127mm | 30mm | 451kg |
1, due to transportation expansion device length limit, can block manufacturing, field stitching. Expansion device stored in the site should be placed in parallel, not cross stacking, to prevent deformation. |
2, the factory, connecting fixture only as transport convenience, the gap is not fixed position. Expansion device installation, should be recognized under the supervision engineer. Can have provisions such as design documents, the provisions of the bridge design documents as the basis. |
3, a retracting device of hoisting, will be reserved for concrete groove hair and clean. When installing expansion device along the bridge to the width of a value to deal with that on expansion joint gap, and the top surface elevation and elevation design of anastomosis after pad, then wear a balance to the connection level reinforced, telescopic device on the anchor bars and beam embedded bars on both sides of the welded (as far as possible to increase the length of welding and welding point, to extend the service life of the telescopic device), to relax the fixture, the free expansion. At this time stretching device has entered the working state. |
4, to complete the process, install the necessary template, in order to prevent the inflow of mortar joints, and then carefully washed. In the concrete pouring preformed groove is larger than that of C50. The concrete pouring concrete should take necessary measures to vibration compacting. |
5, after the initial setting of concrete, pull out the template, timely removal of the foreign body in the expansion joint and special shaped steel. |
Grupos de Producto : Serie de juntas de expansión de puente > Junta de Expansión Elastomérica